Home Contact About GSE Login  

 
Indicators

> Model 250
> Model 255
> Series 350
> Series 460
> Series 560




 
Indicators 
Washdown Indicators 
Parts Counting 
Hazardous Area 
Floor Scales 
Portable Scales 
Check Weighers 
Bench Platforms 
Tank Weighing 
Airline Systems 
Agrifeed 
Pharmacy Scales
Overhead Weighing
Vehicle Scales

 
 
   Home > Indicators > Series 660
 
  Approvals
  Literature
  User Guide
  Calibration
 
 
 
COMMUNICATIONS  
  Port 1 RS232 Full Duplex serial port, RS 485 and 20mA optional
  Port 2,3 RS232 Full Duplex
  Port 4 RS232 Full Duplex or TTL interface to 4x20 VFD
  Protocols Modbus - tm, (DeviceNet, Profibus, Ethernet optional)
  Baud Rates 150 - 115K bps
  Custom Transmit Tables 4 - user defined RS232 output tables
  Input Interpreter Tables 15 - user defined RS232 input tables
DISPLAY  
  VFD Bright 6 digit 75" (20.3mm) Vacuum Fluorescent with 2x5 (10 character) dot matrix for scale status and operator prompt.
ELECTRICAL  
  Power Input AC, 90 - 250VAC, 50/60Hz, DC, 10-32VDC
  DC Output +5VDC, +24VDC
  Excitation Voltage 10 VDC, short circuit protected
  Excitation Current 400 mA, short circuit protected
  Fuse 0.8A Slow - Blow (when using AC power)
  Signal Input Sensitivity 0.1 - 20 mV/V
  Signal Connection 4 or 6 lead with sense lead
  Excitation Power 14 - 350 ohm bridges
ENCLOSURE  
  Keypad Durable elastomeric rubber, 28 Key (Zero, Print, Units, Tare, Select, Enter, 5 Function, Scale Select, Clear ID, Start, Stop, Setup and Full Numeric
  Stainless Steel Nema 4X, IP66 design
  Shipping Weight 7lbs
PERFORMANCE  
  Full Scale(F.S.) Selectable 0.01 to 999,990
  A/D Conversion 60 Hz
  Resolution 100,000d displayed, 1,000,000 internal
  Flash Memory 1 M Bytes
  Zero Track Off - 10d
  Zero Range Selectable, 0.01 - 100% Full Scale
  Non-Linearity 0.005% Full Scale, Load Cell Dependent
  Operating Temperature -10 Degrees Centigrade to +40 Degrees Centigrade
  Warranty 2 year limited
  Units of Measure 4 user defined per scale, 2 custom units
  Time/Date Clock Real Time clock
PROCESS CONTROL  
  I/O Scan Rate 16 ms maximum
  Number of I/O 128 combination, input and output
  PDIO Frequency 8 Hz - 100Khz
  PDIO Voltage 5 VDC
  Counter Input Frequency PDIO 8Hz - 100Khz
Time and Date Clock
Selectable Weighing Units
VFD or LCD Display
Remote Tar, Print, Zero
Panel Mounting
AC or DC Operation
250 programmable macros
250 programmable macros
999 programmable data registers
 
  Multi-Scale Module
  Analog Output Module
  DeviceNet
  RS485 Module
  I/O Relay Module
  Alpha Keyboard
  SCR Module
  ReFlash Software
  User C
  20 mA Current Loop
  DeviceNet
  Profibus
  Ethernet
  Rabbet Software
  Remote Display
 
  Batching and Filling
  Process Control
  Inventory Control
  Parts Counting
  Shipping and Receiving
  Vehicle Weighing
Site Access & Terms Policy || Copyright © 2005 GSE Scale Systems